Related products
Ads
✕
Learn how your ads are chosen
Saved
Save to wishlist
Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share this product
Cel-Fi GO G32 Smart Signal Booster Kit - Yagi/Panel Antennas
This product ad may change over time
ShareCel-Fi GO G32 Smart Signal Booster Kit - Yagi/Panel Antennas
Features: Coverage area*: up to 12,500 square feet Includes a yagi outdoor antenna, panel indoor antenna, and 2 x 30' cables Compatibility: This amplifier can be set to AT&T (3G/4G/5G), T-Mobile (3G/4G/5G), or Verizon ( 3G/4G/5G ) - you must choose one, it will NOT boost all three at the same time. Verizon users: this amplifier will not help with Veri…
Features: Coverage area*: up to 12,500 square feet Includes a yagi outdoor antenna, panel indoor antenna, and 2 x 30' cables Compatibility: This amplifier can be set to AT&T (3G/4G/5G), T-Mobile (3G/4G/5G), or Verizon ( 3G/4G/5G ) - you must choose one, it will NOT boost all three at the same time. Verizon users: this amplifier will not help with Verizon 3G, and it will only help with voice/calling if you have HD Voice/VoLTE enabled on your phone and are in an LTE area. Read more about enabling HD Voice/VoLTE 3G / 4G / 5G Voice and Data Superior Performance: 100dB Max Gain Multi-User Mobile Coverage Multi-Carrier Support with Carrier Switching Indoor / Outdoor NEMA 4 Rated Network Safe Cel-Fi WAVE management platform Cel-Fi GO G32 uses Nextivitys award-winning, network-safe Cel-Fi Smart Signal Booster technology to dramatically improve voice and data coverage in up to two (2) bands for 3G, 4G, and 5G. It is designed to improve indoor and outdoor cellular coverage when one bar is available outdoors, by allowing an antenna to be used to improve indoor cellular performance. Cel-Fi GO X is cost efficient and easy-to-deploy by an installer, and can be easily optimized and monitored by the Cel-Fi WAVE platform. Installation notes: In order for your system to function properly, you must maintain adequate separation between the outside and inside antennas (if the antennas are too close together, there will be oscillation/feedback between the antennas and the amplifier will power down). This amplifier requires up to 50' of separation between the outside and inside antennas . Separation can be horizontal or vertical. If you cannot achieve adequate separation to eliminate oscillation, the gain on the amplifier will automatically adjust, but that will result in a smaller coverage area from the amplifier. Make sure the inside antenna is aimed AWAY from the outside antenna if possible. Features & Benefits: 3G, 4G, & 5G / LTE support (WCDMA / HSPA+ / LTE) Supports two (2) bands simultaneously from a single operator Up to 100dB system gain, per band Peaceful coexistence with adjacent Wi-Fi (2.4 GHz & 5 GHz), femtocells, and cellular devices Advanced digital echo-cancellation (>30dB) and channel select filtering algorithms Automatic Gain Control (AGC) based on fast real-time echo-cancellation NEMA 4 rated enclosure and connectors Glanceable LED User Interface (UI) Supporting smart phone application (WAVE) Convection cooled cast aluminum chassis Easy mounting capability (mounting screws and anchors included) Systems are pre-configured for a single carrier (network operator) Works with any user equipment (UE) on the configured network (no whitelist/blacklist) System intelligence accurately establishes proper safe uplink power in real time Uplink Muting Mode automatically shuts down uplink cellular transmissions when no active user equipment is detected System shuts down upon Operators network command or failure detection Nextivity purpose-built, high-performance, six core ASIC processor, provides best performance at lowest cost Package Includes: Amplifier Power supply Directional yagi antenna Indoor panel antenna 2 x 30' cable Mounting screws and anchors Specifications: Compliance: 3GPP TS 25.143 Rel.10 3GPP TS 36.143 Rel.10 FCC Part 15, 20, 22, 24, 27 Bluetooth BQB CE System Management (Software): Supported by WAVE cloud portal WAVE Portal capability: Status (List and Map) Settings Commissioning Reporting Diagnostics Alarms & Notifications Software Updates Antenna Ports (donor & server): 699 - 2180 Mhz Impedance: 50 Ohm Return Loss: 8 dB Output Protection SMA Female Environmental: Operating temperature: 0° to 65° C Convection Cooling Relative humidity: 0% to 95%, noncondensing WEEE NEMA 4 Surface Temp at any point (30° ambient): 53° C Dimensions: 1.71" x 3.8" x 10.73" (43.5mm x 96.5mm x 272.5mm) 1.87lb (850g) Power: 9.6 - 16.5V 2A current draw 16W nominal power consumption Installation: Mounting hardware included DC Power Plug & Jack: NEMA 4 rated power plugs and jack Radio Performance: The GO system can boost up to two (2) bands concurrently. Either profile can be selected: G32 A) One (1) High band boost and one (1) low band boost or B) Two (2) high bands boost Bands Supported: Band 2: Downlink: 1930-1990 MHz Uplink: 1850-1910 MHz MHz: Up to 20MHz contiguous boost, HSPA or LTE Band 4: GO X,GOX
Something went wrong. Please try again later.
More related products
Ads
✕
Learn how your ads are chosen
Description
Features: Coverage area*: up to 12,500 square feet Includes a yagi outdoor antenna, panel indoor antenna, and 2 x 30' cables Compatibility: This amplifier can be set to AT&T (3G/4G/5G), T-Mobile (3G/4G/5G), or Verizon ( 3G/4G/5G ) - you must choose one, it will NOT boost all three at the same time. Verizon users: this amplifier will not help with Verizon 3G, and it will only help with voice/calling if you have HD Voice/VoLTE enabled on your phone and are in an LTE area. Read more about enabling HD Voice/VoLTE 3G / 4G / 5G Voice and Data Superior Performance: 100dB Max Gain Multi-User Mobile Coverage Multi-Carrier Support with Carrier Switching Indoor / Outdoor NEMA 4 Rated Network Safe Cel-Fi WAVE management platform Cel-Fi GO G32 uses Nextivitys award-winning, network-safe Cel-Fi Smart Signal Booster technology to dramatically improve voice and data coverage in up to two (2) bands for 3G, 4G, and 5G. It is designed to improve indoor and outdoor cellular coverage when one bar is available outdoors, by allowing an antenna to be used to improve indoor cellular performance. Cel-Fi GO X is cost efficient and easy-to-deploy by an installer, and can be easily optimized and monitored by the Cel-Fi WAVE platform. Installation notes: In order for your system to function properly, you must maintain adequate separation between the outside and inside antennas (if the antennas are too close together, there will be oscillation/feedback between the antennas and the amplifier will power down). This amplifier requires up to 50' of separation between the outside and inside antennas . Separation can be horizontal or vertical. If you cannot achieve adequate separation to eliminate oscillation, the gain on the amplifier will automatically adjust, but that will result in a smaller coverage area from the amplifier. Make sure the inside antenna is aimed AWAY from the outside antenna if possible. Features & Benefits: 3G, 4G, & 5G / LTE support (WCDMA / HSPA+ / LTE) Supports two (2) bands simultaneously from a single operator Up to 100dB system gain, per band Peaceful coexistence with adjacent Wi-Fi (2.4 GHz & 5 GHz), femtocells, and cellular devices Advanced digital echo-cancellation (>30dB) and channel select filtering algorithms Automatic Gain Control (AGC) based on fast real-time echo-cancellation NEMA 4 rated enclosure and connectors Glanceable LED User Interface (UI) Supporting smart phone application (WAVE) Convection cooled cast aluminum chassis Easy mounting capability (mounting screws and anchors included) Systems are pre-configured for a single carrier (network operator) Works with any user equipment (UE) on the configured network (no whitelist/blacklist) System intelligence accurately establishes proper safe uplink power in real time Uplink Muting Mode automatically shuts down uplink cellular transmissions when no active user equipment is detected System shuts down upon Operators network command or failure detection Nextivity purpose-built, high-performance, six core ASIC processor, provides best performance at lowest cost Package Includes: Amplifier Power supply Directional yagi antenna Indoor panel antenna 2 x 30' cable Mounting screws and anchors Specifications: Compliance: 3GPP TS 25.143 Rel.10 3GPP TS 36.143 Rel.10 FCC Part 15, 20, 22, 24, 27 Bluetooth BQB CE System Management (Software): Supported by WAVE cloud portal WAVE Portal capability: Status (List and Map) Settings Commissioning Reporting Diagnostics Alarms & Notifications Software Updates Antenna Ports (donor & server): 699 - 2180 Mhz Impedance: 50 Ohm Return Loss: 8 dB Output Protection SMA Female Environmental: Operating temperature: 0° to 65° C Convection Cooling Relative humidity: 0% to 95%, noncondensing WEEE NEMA 4 Surface Temp at any point (30° ambient): 53° C Dimensions: 1.71" x 3.8" x 10.73" (43.5mm x 96.5mm x 272.5mm) 1.87lb (850g) Power: 9.6 - 16.5V 2A current draw 16W nominal power consumption Installation: Mounting hardware included DC Power Plug & Jack: NEMA 4 rated power plugs and jack Radio Performance: The GO system can boost up to two (2) bands concurrently. Either profile can be selected: G32 A) One (1) High band boost and one (1) low band boost or B) Two (2) high bands boost Bands Supported: Band 2: Downlink: 1930-1990 MHz Uplink: 1850-1910 MHz MHz: Up to 20MHz contiguous boost, HSPA or LTE Band 4: GO X,GOX
Sponsored similar products
Ads
✕
Learn how your ads are chosen
Cel - Fi Go + X Smart Booster - With Yagi / Panel Antennas
AdOpen For Business. Same Day Shipping on Orders Placed By 3:00pm CST. Over 200,000 Satisfied Customers. Quick Networking Technology Solution. Call Us!5/5 (8,661 reviews)
Cel-Fi GO X 100 dB Booster Kit | The Cel-Fi GO X by Nextivity
AdThe Best Signal Booster, Bar None, For Rural Areas Where Outdoor Signal Strength is Weak. With Fanatical Tech Support From Our Team of Signal Specialists at Waveform.