Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share this product
Rhino-Rack Vortex StealthBar Roof Rack - Raised, Factory Side Rails - Aluminum - Silver JA7953
This product ad may change over time
ShareRhino-Rack Vortex StealthBar Roof Rack - Raised, Factory Side Rails - Aluminum - Silver JA7953
These quiet, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong roof rack. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft. The Vortex StealthBar is a low profile roof rack system that sits a mere 35mm / 1" above factory raised ra…
These quiet, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong roof rack. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft. The Vortex StealthBar is a low profile roof rack system that sits a mere 35mm / 1" above factory raised rails. Easy to install and remove - it is ideal as a non permanent solution yet offers great strength and durability. Features: Quiet, low-profile roof rack lets you mount carriers and accessories on the roof of your vehicle with raised, factory side rails Slim, elliptical crossbars create an extremely aerodynamic system Flush design - bars sit between side rails to create an ultra-low-profile roof rack Crossbars only raise roof rack profile 1-3/8" above factory side rails Top channel lets you add channel-mounted carriers and accessories Clamp-on accessories can also be mounted to bars Rubberized Vortex strips in top channel dramatically reduces drag and wind noise Keep dirt and grime out of crossbars Provide cushioning and slip resistance for your cargo Versatile bars have 3-15/16" of side to side adjustability Lets you reposition bars to accommodate carriers and accessories that require different crossbar spreads Arched design complements the curves and lines of your roof Lightweight, structural-grade anodized aluminum bars are rustproof Internal H-shaped extrusion provides exceptional bar strength UV-treated, glass-reinforced nylon legs are weather resistant Built-in locks secure crossbars to roof and secure channel-mounted carriers to crossbars Simple, solid installation with rubber-coated stainless steel straps Straps wrap completely around raised roof rails for maximum contact and security Complete system includes 2 crossbars, 4 legs, and fit kit Matte silver finish Specs: Rack weight capacity: 176 lbs Always observe your vehicle's maximum roof load capacity Minimum crossbar spread: 27-9/16" Crossbar dimensions: Front: 30-7/8" long x 3-1/8" wide x 1-3/16" tall Rear: 30-7/8" long x 3-1/8" wide x 1-3/16" tall T-slot dimensions: 13/16" wide x 1/4" tall T-slot top opening: 3/8" Underbar slot: 11-3/4" Limited lifetime warranty The low-profile, aerodynamic Rhino-Rack Vortex StealthBar roof rack lets you carry gear and accessories on your vehicle's roof quietly and with little wind drag. The crossbars mounts directly to your vehicle's raised, factory side rails. The Vortex StealthBars have built-in rubber strips that disrupt airflow for a quiet ride, and the bar is constructed of aluminum so it won't rust. These bars blend seamlessly with the support legs to provide a from-the-factory look, and they are custom cut to your specific vehicle. The legs also include built-in locks that protect your gear and the rack from theft. Aerodynamic Design The rubberized Vortex strips in the crossbar's top channel disrupt airflow with evenly spaced, wave-shaped grooves. This carefully controlled turbulence minimizes wind noise and whistling, so you won't need to add a fairing to your roof rack. And the slim, elliptical Vortex StealthBar cuts through the air with minimal drag - even at highway speeds. The Vortex StealthBar roof rack has a flush-mount design so the crossbar terminates at the legs with no overhang. This provides the rack with a seamless, from-the-factory look, and it also helps to improve aerodynamics by reducing drag and wind noise. Strong, Durable Construction The Vortex StealthBar is made of structural-grade anodized aluminum with an H-shaped internal extrusion. This extrusion strengthens the bar without adding significant amount of weight. And the aluminum bar wont rust so you can leave it on your roof year-round. The rack's durable, glass-reinforced nylon legs are designed to stand up to cargo loads and weather extremes. They're also UV treated to withstand long-term exposure to sunlight. Custom Fit for Easy Installation The roof rack arrives at your doorstep almost completely assembled. The crossbar is already mounted into the nylon legs, and the bar is pre-cut to match the width of your vehicle's roof. The few remaining assembly steps are straightforward and only require the strap and lock fit kit. The fit kit includes co-molded, rubber-coated stainless steel straps designed to fit around your raised, factory side rails. To install, remove the leg covers and simply attach the straps to the bottom of each leg. Then wrap the straps around your vehicle's side rails. Lastly, secure the straps to the top of each leg and replace the cover. Channel-Mounted and Clamp-On Accessories Each crossbar has a built-in C-channel so you can carry channel-mounted accessories such as bike racks, watersports carriers, and ski racks. The Vortex strips in the top channel come in 3 pieces, so theyre easier to adjust than a single long, continuous strip. You can remove,
Description
These quiet, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong roof rack. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft. The Vortex StealthBar is a low profile roof rack system that sits a mere 35mm / 1" above factory raised rails. Easy to install and remove - it is ideal as a non permanent solution yet offers great strength and durability. Features: Quiet, low-profile roof rack lets you mount carriers and accessories on the roof of your vehicle with raised, factory side rails Slim, elliptical crossbars create an extremely aerodynamic system Flush design - bars sit between side rails to create an ultra-low-profile roof rack Crossbars only raise roof rack profile 1-3/8" above factory side rails Top channel lets you add channel-mounted carriers and accessories Clamp-on accessories can also be mounted to bars Rubberized Vortex strips in top channel dramatically reduces drag and wind noise Keep dirt and grime out of crossbars Provide cushioning and slip resistance for your cargo Versatile bars have 3-15/16" of side to side adjustability Lets you reposition bars to accommodate carriers and accessories that require different crossbar spreads Arched design complements the curves and lines of your roof Lightweight, structural-grade anodized aluminum bars are rustproof Internal H-shaped extrusion provides exceptional bar strength UV-treated, glass-reinforced nylon legs are weather resistant Built-in locks secure crossbars to roof and secure channel-mounted carriers to crossbars Simple, solid installation with rubber-coated stainless steel straps Straps wrap completely around raised roof rails for maximum contact and security Complete system includes 2 crossbars, 4 legs, and fit kit Matte silver finish Specs: Rack weight capacity: 176 lbs Always observe your vehicle's maximum roof load capacity Minimum crossbar spread: 27-9/16" Crossbar dimensions: Front: 30-7/8" long x 3-1/8" wide x 1-3/16" tall Rear: 30-7/8" long x 3-1/8" wide x 1-3/16" tall T-slot dimensions: 13/16" wide x 1/4" tall T-slot top opening: 3/8" Underbar slot: 11-3/4" Limited lifetime warranty The low-profile, aerodynamic Rhino-Rack Vortex StealthBar roof rack lets you carry gear and accessories on your vehicle's roof quietly and with little wind drag. The crossbars mounts directly to your vehicle's raised, factory side rails. The Vortex StealthBars have built-in rubber strips that disrupt airflow for a quiet ride, and the bar is constructed of aluminum so it won't rust. These bars blend seamlessly with the support legs to provide a from-the-factory look, and they are custom cut to your specific vehicle. The legs also include built-in locks that protect your gear and the rack from theft. Aerodynamic Design The rubberized Vortex strips in the crossbar's top channel disrupt airflow with evenly spaced, wave-shaped grooves. This carefully controlled turbulence minimizes wind noise and whistling, so you won't need to add a fairing to your roof rack. And the slim, elliptical Vortex StealthBar cuts through the air with minimal drag - even at highway speeds. The Vortex StealthBar roof rack has a flush-mount design so the crossbar terminates at the legs with no overhang. This provides the rack with a seamless, from-the-factory look, and it also helps to improve aerodynamics by reducing drag and wind noise. Strong, Durable Construction The Vortex StealthBar is made of structural-grade anodized aluminum with an H-shaped internal extrusion. This extrusion strengthens the bar without adding significant amount of weight. And the aluminum bar wont rust so you can leave it on your roof year-round. The rack's durable, glass-reinforced nylon legs are designed to stand up to cargo loads and weather extremes. They're also UV treated to withstand long-term exposure to sunlight. Custom Fit for Easy Installation The roof rack arrives at your doorstep almost completely assembled. The crossbar is already mounted into the nylon legs, and the bar is pre-cut to match the width of your vehicle's roof. The few remaining assembly steps are straightforward and only require the strap and lock fit kit. The fit kit includes co-molded, rubber-coated stainless steel straps designed to fit around your raised, factory side rails. To install, remove the leg covers and simply attach the straps to the bottom of each leg. Then wrap the straps around your vehicle's side rails. Lastly, secure the straps to the top of each leg and replace the cover. Channel-Mounted and Clamp-On Accessories Each crossbar has a built-in C-channel so you can carry channel-mounted accessories such as bike racks, watersports carriers, and ski racks. The Vortex strips in the top channel come in 3 pieces, so theyre easier to adjust than a single long, continuous strip. You can remove,