Share this product

Curt Clamp-On Bike Rack for 3 Bikes - 2" Ball Mounts C18013

This product ad may change over time

Share

Curt Clamp-On Bike Rack for 3 Bikes - 2" Ball Mounts C18013

Users say:

This bike rack is a great concept for campers and motorhomes, but it can be difficult to use and secure. It is also not suitable for high-end bikes, as it does not carry them nearly high enough. Despite this, it is still a great product and works well for one bike while towing.

Stop leaving your bikes at home or throwing them in your truck bed. Now you can carry 3 bikes and tow a trailer or camper at the same time. Square jaws clamp around your ball mount shank, leaving your 2" ball mount free for towing. Features: Hanging bike rack carries 3 bikes using your vehicle's ball mount shank (sold separately) Leaves your ball …

New content will be added above the current area of focus upon selection

Stop leaving your bikes at home or throwing them in your truck bed. Now you can carry 3 bikes and tow a trailer or camper at the same time. Square jaws clamp around your ball mount shank, leaving your 2" ball mount free for towing. Features: Hanging bike rack carries 3 bikes using your vehicle's ball mount shank (sold separately) Leaves your ball mount free to tow a trailer or camper Rubber cradles secure bikes by the top tube Tethered pull pins allow arms to fold Quick-release handle with safety latch lets you clamp the rack to your ball mount Support straps keep rack sturdy during transport Frame adapter bar (sold separately) required for bikes without a straight, horizontal top tube Black powder coated steel construction is rust resistant Specs: Application: 2" x 2" ball mounts Requires 1-1/2" of space on the shank of the ball mount Carrying capacity: 3 bicycles Weight capacity: 45 lbs per bike Distance between arms (outside cradle to outside cradle): 17-3/8" Weight: 13 lbs 1-Year limited warranty Carry Your Bikes While Towing Your Trailer Unlike bike racks that mount in your vehicle's hitch receiver, this Curt rack simply clamps onto your 2" ball mount. It allows you to carry 3 bikes and tow a trailer or camper at the same time. This means you don't have to leave your bikes at home or throw them in your truck bed while traveling. Additionally, if your vehicle has a roof rack, you won't have to use valuable gear space by adding bike racks. Dual Folding Arms with Rubber Cradles The rack has dual arms that provide excellent support for your bikes. They slope up to provide clearance over your trailer. To fold the arms down, remove the tethered pull pins at the top of the mast. This leaves a smaller footprint, so you can keep the rack on your vehicle to park in your garage. And when stored in this configuration, it doesn't take up as much space in your garage. Cradles with rubber straps hold your bikes firmly in place. Each set of cradles has two straps that secure your bike along the top tube. The soft rubber cradles slide and rotate around the rack's arms to accommodate bikes of different styles and shapes. They also have raised ridges that prevent your brake and shifter cables from getting pinched. Easy, Clamp-On Installation The rack clamps to your 2" ball mount (sold separately), allowing you to simultaneously tow your trailer. To install the rack, place the jaws over the shank of your ball mount, press down on the hinged crossbar that spans the rack's arms, and tighten the locking t-knob. The rack also has safety straps that loop around the arms with hooks that cinch back into the crease on your vehicle's hatch or tailgate. The hooks have a rubber coating to protect your vehicle from scratches and scuffs. To remove the rack simply loosen the t-knob and pull up on the quick-release handle. Available Adapter Bar If you have a women's bike, kid's bike, or any other bike without a straight, horizontal top tube, you will need an adapter bar (sold separately) to properly mount your bike. The bar fits between the seat post and handlebar stem post of your bike to create a top tube so your bike hangs level on the rack. Custom Fit For: 2004-2023 Fleetwood Bounder Motorhome, 2012-2023 Thor ACE Motorhome, 2008-2020 Fleetwood Discovery Motorhome, 2008-2023 Tiffin Allegro Bus Motorhome, 2008-2023 Tiffin Phaeton Motorhome, 2008-2023 Winnebago Vista Motorhome, 2008-2017 Winnebago Sightseer Motorhome, 2008-2023 Fleetwood Southwind Motorhome, 2008-2018 Tiffin Allegro Motorhome, 2008-2023 Jayco Greyhawk Motorhome, 2013-2023 Forest River FR3 Motorhome, 2008-2023 Winnebago View Motorhome, 2011-2023 Thor Windsport Motorhome, 2004-2023 Winnebago Adventurer Motorhome, 2008-2022 Forest River Sunseeker Motorhome, 2008-2023 Coachmen Mirada Motorhome, 2008-2022 Forest River Forester Motorhome, 2008-2019 Jayco Seneca Motorhome, 2011-2023 Thor Four Winds Motorhome, 2016-2023 Jayco Alante Motorhome

See more below

e

etrailer.com

$154.02

Visit site

Review summary

AI-generated content

This bike rack is a great concept for campers and motorhomes, but it can be difficult to use and secure. It is also not suitable for high-end bikes, as it does not carry them nearly high enough. Despite this, it is still a great product and works well for one bike while towing.

Pros

Easy to mount/unmount
Secure clamp
Works well for towing
Affordable alternative to dedicated racks

Cons

Loose fit
Rubber straps require effort
Requires 1.5"" exposed shank
Lacks operating instructions"

Read original reviews

Description

Stop leaving your bikes at home or throwing them in your truck bed. Now you can carry 3 bikes and tow a trailer or camper at the same time. Square jaws clamp around your ball mount shank, leaving your 2" ball mount free for towing. Features: Hanging bike rack carries 3 bikes using your vehicle's ball mount shank (sold separately) Leaves your ball mount free to tow a trailer or camper Rubber cradles secure bikes by the top tube Tethered pull pins allow arms to fold Quick-release handle with safety latch lets you clamp the rack to your ball mount Support straps keep rack sturdy during transport Frame adapter bar (sold separately) required for bikes without a straight, horizontal top tube Black powder coated steel construction is rust resistant Specs: Application: 2" x 2" ball mounts Requires 1-1/2" of space on the shank of the ball mount Carrying capacity: 3 bicycles Weight capacity: 45 lbs per bike Distance between arms (outside cradle to outside cradle): 17-3/8" Weight: 13 lbs 1-Year limited warranty Carry Your Bikes While Towing Your Trailer Unlike bike racks that mount in your vehicle's hitch receiver, this Curt rack simply clamps onto your 2" ball mount. It allows you to carry 3 bikes and tow a trailer or camper at the same time. This means you don't have to leave your bikes at home or throw them in your truck bed while traveling. Additionally, if your vehicle has a roof rack, you won't have to use valuable gear space by adding bike racks. Dual Folding Arms with Rubber Cradles The rack has dual arms that provide excellent support for your bikes. They slope up to provide clearance over your trailer. To fold the arms down, remove the tethered pull pins at the top of the mast. This leaves a smaller footprint, so you can keep the rack on your vehicle to park in your garage. And when stored in this configuration, it doesn't take up as much space in your garage. Cradles with rubber straps hold your bikes firmly in place. Each set of cradles has two straps that secure your bike along the top tube. The soft rubber cradles slide and rotate around the rack's arms to accommodate bikes of different styles and shapes. They also have raised ridges that prevent your brake and shifter cables from getting pinched. Easy, Clamp-On Installation The rack clamps to your 2" ball mount (sold separately), allowing you to simultaneously tow your trailer. To install the rack, place the jaws over the shank of your ball mount, press down on the hinged crossbar that spans the rack's arms, and tighten the locking t-knob. The rack also has safety straps that loop around the arms with hooks that cinch back into the crease on your vehicle's hatch or tailgate. The hooks have a rubber coating to protect your vehicle from scratches and scuffs. To remove the rack simply loosen the t-knob and pull up on the quick-release handle. Available Adapter Bar If you have a women's bike, kid's bike, or any other bike without a straight, horizontal top tube, you will need an adapter bar (sold separately) to properly mount your bike. The bar fits between the seat post and handlebar stem post of your bike to create a top tube so your bike hangs level on the rack. Custom Fit For: 2004-2023 Fleetwood Bounder Motorhome, 2012-2023 Thor ACE Motorhome, 2008-2020 Fleetwood Discovery Motorhome, 2008-2023 Tiffin Allegro Bus Motorhome, 2008-2023 Tiffin Phaeton Motorhome, 2008-2023 Winnebago Vista Motorhome, 2008-2017 Winnebago Sightseer Motorhome, 2008-2023 Fleetwood Southwind Motorhome, 2008-2018 Tiffin Allegro Motorhome, 2008-2023 Jayco Greyhawk Motorhome, 2013-2023 Forest River FR3 Motorhome, 2008-2023 Winnebago View Motorhome, 2011-2023 Thor Windsport Motorhome, 2004-2023 Winnebago Adventurer Motorhome, 2008-2022 Forest River Sunseeker Motorhome, 2008-2023 Coachmen Mirada Motorhome, 2008-2022 Forest River Forester Motorhome, 2008-2019 Jayco Seneca Motorhome, 2011-2023 Thor Four Winds Motorhome, 2016-2023 Jayco Alante Motorhome

Specifications

Model	C18013
Number Of Items	3
rack type	Bike
bike type	Clamp-on Bike